A Virtual Webinar Using Carlson Software – Learn to Calculate Site Quantities

This webinar provides a detailed walkthrough of surface modeling and material takeoff workflows using Carlson Civil and Construction’s SiteNet and Takeoff menus. Jennifer DiBona explains how to prepare clean CAD layers, define surfaces, calculate volumes and generate material quantity reports for accurate construction estimating.

Key Topics:

• Layer management and cleanup for surface modeling
• Defining existing and design surfaces in SiteNet
• Setting up subgrade, topsoil and boundary polylines
• Calculating cut/fill volumes and material quantities
• Visual verification and troubleshooting techniques

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 01/27/2021.

A Virtual Webinar Using Carlson Software – Learn to Calculate Quantities

This webinar features Ashton Cary of Terrain Technology demonstrating how to use Carlson Takeoff for quantity calculations and surface modeling in a real-world project. The session covers drawing cleanup, layer management, surface creation and exporting data for machine control applications.

Key Topics:

• Carlson Takeoff workflow for grading and quantity estimation
• Drawing cleanup and layer management in AutoCAD/IntelliCAD
• Creating and verifying existing and proposed surfaces
• Topsoil removal and subgrade adjustments
• Exporting data for machine control (Topcon, Leica)

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Ashton Cary on 05/26/2021.

A Virtual Webinar Using Carlson Software – Learn to Design Subdivision Layouts

This webinar, hosted by That CAD Girl and presented by Mark Long, provides a detailed walkthrough of Carlson Software’s LotNet tools for practical subdivision layout design. The session covers setup, configuration and efficient workflows for creating, labeling and adjusting residential lots using Carlson’s automation features.

Key Topics:

• Practical use of LotNet for subdivision design
• Setting up boundaries, right-of-way and lot edges
• Automating lot labeling, numbering and setbacks
• Adjusting lot layouts and cleaning linework
• Tips for efficient and profitable subdivision planning

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Mark Long on 10/14/2021.

A Virtual Webinar Using Carlson Software – Learn to Process Drone and LiDAR Data

This webinar provides a detailed demonstration of Carlson Photo Capture and Carlson Point Cloud software, showcasing how drone imagery and LiDAR data can be processed into accurate 3D surfaces for site design. The session covers workflows, pricing models and integration with Carlson Precision 3D and hydrology tools.
Key Topics:

• Carlson Photo Capture setup and workflow
• Carlson Point Cloud processing and editing tools
• Integration with Precision 3D and hydrology modeling
• Kentucky LIDAR data access and usage
• Surface creation, breaklines and stormwater design

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Steve Cummings on 05/20/2021.

A Virtual Webinar Using Carlson Software – Learn to Automate Field Data Drafting

This webinar provides a step‑by‑step introduction to Carlson Software’s Field to Finish workflow, showing how to configure FLD files, process survey points and generate automatic linework and symbols. Attendees learn how to move from raw field data to a clean, layered drawing ready for mapping or surface modeling.

Key Topics:

• Introduction to Field to Finish concepts
• Comparison with Land Desktop / Civil 3D description keys
• Creating and editing FLD files
• Managing point layers, symbols and linework
• Using special codes and linework automation
• Handling 2D vs 3D polylines and breaklines

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 03/10/2021.

A Virtual Webinar Using Carlson Software – Learn to Analyze Surface Volumes

This webinar, hosted by That CAD Girl, provides an in-depth walkthrough of Carlson Software’s surface modeling tools, including creating, editing and analyzing surfaces, volumes and contours. Jennifer demonstrates practical workflows for managing TIN files, comparing surfaces and visualizing data in 3D for civil and survey applications.

Key Topics:

• Working with TIN files and surface visualization
• Creating and editing surfaces, contours and boundaries
• Volume calculations and cut/fill analysis
• Integrating GIS and elevation data
• Practical Carlson Civil and Survey tips

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 10/12/2021.

A Virtual Webinar Using Carlson Software – Learn to Design Subdivisions

This webinar, hosted by That CAD Girl and presented by Doug Aaberg from Carlson Software, demonstrates practical ways to use Carlson LotNet for efficient lot layout and subdivision design. The session covers both simple and complex land division workflows with an emphasis on real-world applications and problem-solving within the software.

Key Topics:

• Introduction to Carlson LotNet and setup basics
• Creating and editing lot boundaries and right-of-way lines
• Automating lot subdivision and labeling
• Integrating road networks and cul-de-sacs
• Troubleshooting and real-world design challenges

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Doug Aaberg on 06/24/2021.

A Virtual Workshop Using Carlson Hydrology – Learn to Prepare watersheds and design storm drainage networks

This Carlson Software virtual workshop, led by hydrology expert Mark Long, provides an in-depth walkthrough of storm and sanitary sewer design using Carlson Hydrology tools. The session covers watershed setup, pipe network creation, stormwater management, and integration with CAD surfaces for accurate drainage modeling.

Key Topics:

• Setting up watershed layers and runoff coefficients
• Designing storm sewer networks and detention ponds
• Creating and editing sanitary sewer systems
• Using Carlson Hydrology’s network, drainage, and profile tools
• Managing surfaces, rainfall data, and hydraulic grade lines

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Mark Long on 12/17/2020.

A Virtual Workshop Using Carlson CADnet – Learn to Speed up raster-plan work and routine cad drafting

This virtual workshop, led by That CAD Girl, covers practical CAD and Carlson Software tips and tricks for surveyors, engineers, and CAD technicians. The session demonstrates workflows for merging raster images, using Field to Finish, managing polylines, cleaning drawings, and creating reusable title block templates.

Key Topics:

• CADNet raster merging and image handling
• Field to Finish setup and automation
• Polyline editing and boundary creation
• Drawing cleanup and block management
• Title block templates and layout management
• Converting spot elevations to Carlson points
• Line type customization and text rotation

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 12/17/2020.

A Virtual Workshop Using Carlson Point Cloud – Learn to Import and process point clouds for cad surface workflows

This bonus session from the 2020 Virtual Workshops focuses on Carlson Point Cloud software, demonstrating how to import, clean, and process point cloud data to create usable terrain models. Steve Cummings and David Kraus walk through workflows, performance considerations, and practical tips for handling large LIDAR datasets in Carlson Civil.

Key Topics:

• Importing and visualizing point clouds in Carlson Point Cloud
• Differences between Basic and Advanced versions
• Creating bare earth models and TIN surfaces
• Managing large datasets and optimizing performance
• Workflow for civil site studies using LIDAR and aerial data

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.
This session was presented by Jennifer DiBona on 12/17/2020.