A Virtual Webinar Using Carlson Software – Learn to Calculate Site Quantities

This webinar provides a detailed walkthrough of surface modeling and material takeoff workflows using Carlson Civil and Construction’s SiteNet and Takeoff menus. Jennifer DiBona explains how to prepare clean CAD layers, define surfaces, calculate volumes and generate material quantity reports for accurate construction estimating.

Key Topics:

• Layer management and cleanup for surface modeling
• Defining existing and design surfaces in SiteNet
• Setting up subgrade, topsoil and boundary polylines
• Calculating cut/fill volumes and material quantities
• Visual verification and troubleshooting techniques

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 01/27/2021.

A Virtual Webinar Using Carlson Software – Learn to Calculate Quantities

This webinar features Ashton Cary of Terrain Technology demonstrating how to use Carlson Takeoff for quantity calculations and surface modeling in a real-world project. The session covers drawing cleanup, layer management, surface creation and exporting data for machine control applications.

Key Topics:

• Carlson Takeoff workflow for grading and quantity estimation
• Drawing cleanup and layer management in AutoCAD/IntelliCAD
• Creating and verifying existing and proposed surfaces
• Topsoil removal and subgrade adjustments
• Exporting data for machine control (Topcon, Leica)

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Ashton Cary on 05/26/2021.

A Virtual Webinar Using Carlson Software – Learn to Design Subdivision Layouts

This webinar, hosted by That CAD Girl and presented by Mark Long, provides a detailed walkthrough of Carlson Software’s LotNet tools for practical subdivision layout design. The session covers setup, configuration and efficient workflows for creating, labeling and adjusting residential lots using Carlson’s automation features.

Key Topics:

• Practical use of LotNet for subdivision design
• Setting up boundaries, right-of-way and lot edges
• Automating lot labeling, numbering and setbacks
• Adjusting lot layouts and cleaning linework
• Tips for efficient and profitable subdivision planning

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Mark Long on 10/14/2021.

A Virtual Webinar Using Carlson Software – Learn to Process Drone and LiDAR Data

This webinar provides a detailed demonstration of Carlson Photo Capture and Carlson Point Cloud software, showcasing how drone imagery and LiDAR data can be processed into accurate 3D surfaces for site design. The session covers workflows, pricing models and integration with Carlson Precision 3D and hydrology tools.
Key Topics:

• Carlson Photo Capture setup and workflow
• Carlson Point Cloud processing and editing tools
• Integration with Precision 3D and hydrology modeling
• Kentucky LIDAR data access and usage
• Surface creation, breaklines and stormwater design

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Steve Cummings on 05/20/2021.

A Virtual Webinar Using Carlson Software – Learn to Automate Field Data Drafting

This webinar provides a step‑by‑step introduction to Carlson Software’s Field to Finish workflow, showing how to configure FLD files, process survey points and generate automatic linework and symbols. Attendees learn how to move from raw field data to a clean, layered drawing ready for mapping or surface modeling.

Key Topics:

• Introduction to Field to Finish concepts
• Comparison with Land Desktop / Civil 3D description keys
• Creating and editing FLD files
• Managing point layers, symbols and linework
• Using special codes and linework automation
• Handling 2D vs 3D polylines and breaklines

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 03/10/2021.

A Virtual Webinar Using Carlson Software – Learn to Analyze Surface Volumes

This webinar, hosted by That CAD Girl, provides an in-depth walkthrough of Carlson Software’s surface modeling tools, including creating, editing and analyzing surfaces, volumes and contours. Jennifer demonstrates practical workflows for managing TIN files, comparing surfaces and visualizing data in 3D for civil and survey applications.

Key Topics:

• Working with TIN files and surface visualization
• Creating and editing surfaces, contours and boundaries
• Volume calculations and cut/fill analysis
• Integrating GIS and elevation data
• Practical Carlson Civil and Survey tips

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 10/12/2021.

A Virtual Webinar Using Carlson Software – Learn to Design Subdivisions

This webinar, hosted by That CAD Girl and presented by Doug Aaberg from Carlson Software, demonstrates practical ways to use Carlson LotNet for efficient lot layout and subdivision design. The session covers both simple and complex land division workflows with an emphasis on real-world applications and problem-solving within the software.

Key Topics:

• Introduction to Carlson LotNet and setup basics
• Creating and editing lot boundaries and right-of-way lines
• Automating lot subdivision and labeling
• Integrating road networks and cul-de-sacs
• Troubleshooting and real-world design challenges

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Doug Aaberg on 06/24/2021.

A Virtual Webinar Using Carlson Software – Learn to Build 3D Models

This webinar, Making Models from a Mess, demonstrates how to use Carlson Software tools to convert messy 2D CAD drawings into clean, geo-referenced 3D models suitable for staking and machine control. Jennifer DiBona walks through file cleanup, layer management, elevation assignment and model preparation workflows using Carlson Civil, Takeoff and SiteNet.

Key Topics:

• Cleaning and consolidating 2D CAD files for modeling
• Using Carlson’s 2D-to-3D elevation tools
• Handling Civil 3D and LandXML data
• Layer management and drawing cleanup best practices
• Preparing surface models for staking and machine control

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 11/16/2021.

A Virtual Webinar Using Carlson Software – Learn to Prepare Drawings for Staking

This webinar demonstrates how to prepare and clean CAD drawings for use in Carlson Software’s surface modeling and construction staking workflows. It covers techniques for consolidating, cleaning and elevating 2D data into accurate 3D models ready for field and machine control applications.

Key Topics:

• Drawing cleanup and preparation for staking and surface modeling
• Consolidating and cleaning 2D CAD data
• Handling Civil 3D and Land Desktop data
• Using Carlson commands for 2D-to-3D conversion
• Elevation control for accurate 3D models
• Preparing models for field and machine control applications

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 04/20/2021.

A Virtual Webinar Using Carlson Software – Learn to Configure Settings and Points

This webinar introduces new users to Carlson Software’s setup, configuration and point management tools within IntelliCAD. It covers user interface customization, data folder organization, configuration management and drawing templates for efficient CAD workflows.

Key Topics:

• Carlson Software installation and interface overview
• Configuring data and project folders
• Managing settings, templates and drawing defaults
• Importing and displaying points
• Understanding configuration files and backups

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 08/02/2021.