Site Project Grading from Start to Finish

A Virtual Webinar Using Carlson Software – Learn to Complete Site Grading

This webinar from That CAD Girl provides a complete walkthrough of grading a small site project—from setup to balanced design—using Carlson Civil Software. It demonstrates practical 3D data management, polyline conversions, surface creation, and balancing methods essential for site design professionals.

Key Topics:

  • Carlson Civil setup, configuration, and linking settings
  • Elevating polylines and creating 3D grading plans
  • Grading workflow for building pads, curbs, and parking lots
  • Surface model creation, densification, and balancing cut/fill volumes
  • Visualization and verification of final design surfaces

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 12/17/2019.



Some content on this website was prepared with AI assistance. Please verify important information with the manufacturer or original source before making purchasing or financial decisions.

If you find the material on this website helpful, please consider supporting That CAD Girl by purchasing our products or services.

If you are interested in purchasing products or services we do not offer, we would love to refer you to one of our Trusted Partners. Please click here to send us a message with your request.

Mark’s Favorite Things in Carlson Desktop Software–by Mark Long

A Virtual Webinar Using Carlson Software – Learn to Improve Desktop Workflows

This webinar, hosted by That CAD Girl and presented by Mark Long from Carlson Software, highlights Mark’s favorite time-saving features and techniques in Carlson’s desktop civil design tools. The session demonstrates practical workflows in Roadnet, cross-section generation, cul-de-sac design, and the new 2020 utility network functions.

 

Key Topics:

  • Using Carlson Roadnet for roadway design efficiency
  • Cross sections, profiles, and intersection editing
  • Customization of cul-de-sacs and curb ramps
  • Introduction to the Utility Network module
  • Carlson year-end software offers and webinar schedule

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Mark Long on 12/04/2019.

Site Project Grading from Start to Finish

A Virtual Webinar Using Carlson Software – Learn to Configure Settings and Points

 

This webinar provides a complete walkthrough of grading a small site project from start to finish using Carlson Civil. It demonstrates using 3D data commands, layer management, polyline editing, surface creation, and daylighting techniques to produce a balanced, accurate site model.

  • Key Topics:
  • Converting 2D elements to 3D polylines
  • Building and modifying surfaces in Carlson Civil
  • Applying slopes, offsets, and elevations for pads, curbs, and driveways
  • Managing contours and ensuring positive drainage
  • Using shrink‑wrap entities, polyline utilities, and 3D surface analysis

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 01/16/2019.

Overview of Paper Space

A Virtual Webinar Using CAD – Learn to Set Up Paper Space

 

This webinar from That CAD Girl provides an in‑depth walkthrough of paper space in CAD software. It teaches users how to set up layout tabs, create and manage viewports, set scale, and handle plotting configurations for professional‑grade drawings.

Key Topics:

  • Understanding model space vs. paper space
  • Creating and managing layout tabs and borders
  • Working with viewports and plot scales
  • Controlling visibility and layers per viewport
  • Change Space command and layout management

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 06/19/2019.

Overview of Carlson CADNet – Working with Images _ Converting to Linework

A Virtual Webinar Using Carlson Software – Learn to Build Surface Models

This webinar provides a detailed walkthrough of Carlson CAD Net’s capabilities for converting and managing raster and vector files, digitizing scanned drawings, merging multiple plan sheets, and importing/exporting BIM data. It shows how to efficiently transform PDFs and images into editable CAD linework for construction takeoffs and modeling.

Key Topics:

  • Converting raster and vector PDFs to CAD linework
  • Scaling and merging raster images and plan sheets
  • Digitizing contours and features for takeoff and site modeling
  • Understanding raster vs. vector data differences
  • Cleaning and vectorizing images for surface modeling

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 05/16/2019.

Surface Modeling with the SiteNet _ Takeoff Menus in Civil, Construction & Takeoff

A Virtual Webinar Using Carlson Software – Learn to Build Surface Models

 

This detailed webinar explains how to use Carlson Software’s SiteNet and Takeoff menus for layer‑based surface modeling, material quantity takeoff, and topsoil management. It walks users through setting up drawings, defining layers, creating surfaces, and running reports for excavation, paving, and earthwork calculations.

Key Topics:

  • Carlson Civil/Construction SiteNet and Takeoff menus
  • Defining layers and surfaces (Existing vs. Design)
  • Quantities and subgrades for earthwork, curb, pavement, and topsoil replacement

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 05/15/2019.

Overview of SurvNet Least Squares with Doug Aaberg of Carlson Software

A Virtual Webinar Using Carlson Software – Learn to Analyze Survey Networks

In this Carlson Software webinar, Doug Aaberg demonstrates the enhanced SurvNet Least Squares adjustment tool for Carlson 2020, detailing its updated interface, best practices for survey dataprocessing, and the mathematical principles behind least squares. The session also covers project settings, error handling, integrating GPS/vector data, and practical field-to-office coordination for better survey network accuracy.

Key Topics:

  • Carlson SurvNet 2020 interface updates and workflow improvements
  • Least Squares adjustment principles and network redundancy
  • Integrating GPS vector data with traditional traverse data
  • Error weighting, chi-square testing, and blunder detection
  • Practical examples and hands-on training previews

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Doug Aaberg on 10/16/2019.

Introduction to Carlson Software – Settings, Setup, Configuration & Points

A Virtual Webinar Using Carlson Software – Configure Settings, Setup and Points

This webinar introduces new and existing users to Carlson Software’s setup fundamentals—focusing on configuration management, default drawing settings, and point handling. Attendees learn to streamline project organization, default settings, and coordinate-file management to build efficient CAD workflows.

Key Topics:

  • Carlson Software default settings and configuration workflow
  • Managing coordinate (CRD) files and linking with drawings
  • Project folder structures and data management
  • Working with drawing templates and point display options

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 09/04/2019.

Introduction to Carlson Software-Settings, Setup, Configuration & Points

A Virtual Webinar Using Carlson Software – Learn to Configure Settings and Points

This introductory Carlson Software webinar walks new users through default settings, configuration management, and point setup in Carlson. Participants learn how to control project data folders, manage drawing templates, and create consistent settings across projects.

Key Topics:

  • Carlson Configure and Default Settings
  • Project and Data Folder Methods
  • Drawing Setup, Scales, and Point Configuration

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 03/04/2019.

Introduction to Carlson Software-Settings, Setup, Configuration & Points

A Virtual Webinar Using Carlson Software – Configure Settings, Setup and Points

This training webinar introduces new Carlson Software users to the essential configuration tools for managing defaults, projects,
data folders, and drawing settings in programs like Survey and Civil. Participants learn how to customize templates, configure system settings, and streamline workflows for consistent CAD and survey setups.

Key Topics:

  • Default settings and configuration in Carlson Software
  • Project and data folder organization (fixed, drawing, and project methods)
  • Drawing setup, templates, and scaling principles
  • Linking data files (CRD, CL, TIN, PRO) and maintaining consistency
  • Saving and sharing configuration profiles (CFG files)

 

Descriptions, transcripts and other details of this recording have been AI-generated and may contain errors.

This session was presented by Jennifer DiBona on 11/06/2019.